An in-built but changeable cuvette allows quick water sampling by just dipping in the IP68 waterproof PoolLab.
PoolLab with its 6 buttons is designed for instant access to the parameters installed, which are: pH, Chlorine (free/combined/total), Alkalinity (Acid Capacity), Cyanuric Acid (Stabilizer). Active Oxygen (MPS), Bromine, Chlorine Dioxide, Ozone and Hydrogen Peroxide.
As PoolLab uses wireless Bluetooth 4.0 technology, it can easily be connected to free software and app for test result management.
Once test results are synchronized, software and app allow dosage recommendations, based on individually entered water treatment chemicals. User can print test result reports, perform index calculation, such as LSI, and much more.
A free cloud server takes care that data on app and software are constantly synchronized, if the user decides to use this feature.
|pH value||6.50 - 8.40 pH||Phenol Red Photometer|
|Chlorine (free/combined/total)||0.00 - 6.00 mg/l (ppm)||DPD N°1 Photometer
DPD N°3 Photometer
|Alkalinity (Acid Capacity)||0 - 300 mg/l (ppm) CaCO3||Alkalinity-M Photometer|
|Cyanuric Acid (Stabilizer)||0 - 160 mg/l (ppm)||CYA-Test Photometer|
|Active Oxygen (MPS)||0.0 - 30.0 mg/l (ppm)*||DPD N°4 Photometer*|
|Bromine||0.0 - 13.5 mg/l (ppm)**||DPD N°1 Photometer
|Chlorine Dioxide||0.0 - 11.4 mg/l (ppm)**||DPD N°1 Photometer
|Ozone||0.00 - 4.00 mg/l (ppm)**||DPD N°1 Photometer
DPD N°3 Photometer
|Hydrogen Peroxide LR||0.00 - 2.90 mg/l (ppm)*||Hyd. Peroxide LR Photometer*|
|Hydrogen Peroxide HR||0 - 200 mg/l (ppm)*||Acidifying PT Photometer*
Hyd. Peroxide HR Photometer*
|Total Hardness||0 - 500 mg/l (ppm)*||PoolLab Total Hardness Reagent Kit|
|Calcium Hardness||0 - 500 mg/l (ppm)*||PoolLab Calcium Hardness Reagent Kit|
*requires reagent not included in basic kit
**requires Glycine reagent tablets if chlorine is present.
Glycine reagent tablets are not included in the basic kit